HDKTC1 Hospital Discharge Falls Risk Home Caregiver System
? Comprehensive falls prevention and detection caregiver support pack
? Bed leaving detection alarm sensor for early bed exit notification
? Chair leaving detection alarm sensor for early chair exit notification
? Waterproof fall detection bracelet and SOS help call button
This kit provides all the items required to monitor the key factors leading to a potential fall, bed, and chair exit. Combined with an automatic fall detecting bracelet for instant caregiver alarm notifications the system provides the tools for effective falls management. Suitable for domestic and professional caregivers. The sensors are cabled and plug into an alarm controller transmitter, also equipped with a central call button, output for connection to an external alarm device, and selectable alarm options including exit delay. The included portable alarm receiver has audible tone and flashing coloured ultra-bright LEDs making it suitable for hard of hearing caregivers. An optional extra for the alarm receiver is an under-pillow vibrating pad to alert deaf caregivers.
Kit contains: 2 x BTX-MED04 sensor alarm transmitters, 1 x MED04BP bed sensor, 1 x CT2T chair sensor, 1 x NMDRX portable wireless alarm, 1 x MP-TXP11 fall bracelet, all required batteries, user instructions.
| Technical Features NMDRX Portable Alarm Receiver |
|---|
| 5-Channel portable alarm receiver |
| 5 x alarm colour LEDs for alarm channel selection |
| Powered by 3 x AAA batteries |
| Dimensions: H 80mm W 68mm D 38mm |
| Optional mains AC power adaptor |
| 3-level alarm tone volume switch (up to 96dB) |
| Latched or timed alarm duration (continuous or 30 seconds) |
| Power/signal/battery status LED |
| Output for vibrating pad to aid deaf people |
| Frequency 433 MHz |
| Long range capability |
| Vibrating pad output 3v @ 300ma via 3.5mm jack socket |
| Technical Features BTXMED04 Sensor Alarm Transmitter |
|---|
| Alarm radio frequency 433MHz |
| Transmission range: 100M (open field) |
| Power: Battery 3 x AA 1.5V Alkaline (included) |
| Power: DC 6V adaptor 300mA (optional) |
| Dual trigger inputs: 1 x RJ11 (pads) 1 x 6.3mm (contact) |
| Battery health monitoring with low warning LED |
| Sensor pad monitoring LED |
| Alarm options: Instant, 15-minute delayed, 30-minute delayed |
| Dimensions: 115mm x 75mm x 30mm |
| Weight: (excluding batteries) 130g |
| Technical Features MP-TXP11 Fall Detection Bracelet |
|---|
| Powered by 1 x CR2450 long-life battery (3-year average use) |
| Waterproof to IP67 |
| Transmitting frequency 433MHz |
| Transmitter range 60-100M (typical) |
| Includes lanyard with anti-ligature point and wrist strap |
| Secure on/off setting with included carer magnet |
| Dimensions 45 x 30 x 10mm |
| Gross weight 20g (excluding lanyard/strap) |
| Reassurance LED when transmitting |
| Low battery flashing LED alert |
| Technical Features MED04BP Corded Bed Sensor Pad |
|---|
| Dimensions: 750mm x 450mm x 8mm |
| Cord length: 3M |
| Connector plug type: RJ11 |
| Pad material: PVC |
| Technical Features CT2T Corded Chair Sensor Pad |
|---|
| Dimensions: 380mm x 300mm x 8mm |
| Cord length: 3M |
| Connector plug type: RJ11 |
| Pad material: PVC |
