Fire alarm adaptations for deaf people

Medpage Ltd

BSI Quality Assurance - Established 1984

Quality Product - Quality Service

FIRE ALARM PAGING SYSTEMS FOR DEAF PEOPLE - Interfaces with commercial fire alarm panels

This fire alarm interfacing kit is to enable signals from a fire alarm panel to be transmitted through a data paging system to provide vibrating alarms to warn deaf people of fire in public buildings.

A transmitter is fitted through a monitored connection to the fire alarm panel. The transmitter can be programmed with fire zone information to warn the deaf person not only to operation of the fire alarm but also the exact location. An alphanumeric pager with vibrating alert clearly displays the information.

Any number of pagers can be added to the system and all will be group called in the event of a fire. As deaf visitors arrive, whether for a conference, staying at a hotel or as an employee, they are issued with a pager. Additionally, each pager has a unique code that can be used for individual paging. All members of staff can use pagers. When it comes to individual paging requirements, the system is very flexible.

COMMERCIAL FIRE ALARM INTERFACING EQUIPMENT FOR DEAF PAGING SYSTEMS

Fire alarm interface transmitter - Connects to an auxiliary output relay of the fire alarm panel. When the fire alarm is active, the transmitter signals all system pagers. H 175mm W 100mm D 40mm. Power supply monitor LED. Battery backup with power supply failure indication. Panel monitor loop circuit. Transmission frequency 433.92 mHz. Transmit power 10mW + 10db. Paging Format: POCSAG. Modulation FSK, NRZ. Transmit indicator LED. Power requirement 24V from panel. Monitored supply. Monitored trigger connections. Replacement cycle 5 years. CE marked.

Signal booster data repeater - Installed within 50 Metres of the interface transmitter. Receives signals from fire alarm interface transmitter, then re-transmits at increased transmission power. Power requirement 12V DC supplied by UPS backup system connected to AC mains fused spur. Power consumption 32 mA standby, 400mA on air. Data format: POCAG or any level 2 H/L. RX sensitivity: 7uV at 1200 bps. Signal processing delay: around 4 seconds. Dimensions: H 185mm W 100mm D 40mm.

3	UPS power supply with battery backup - Connect to AC mains fused spur. 240V AC input. DC output 13.8 V. Power on LED, mains power loss LED. Lead acid battery backup 2.1A. Provides 14 days backup with full performance.

Alphanumeric tone with vibrate pager - Single line LCD message display for up to 40 characters. Out of range and signal loss indicator. Displays date, time. Pager alert method: Choice of 5 tones or vibration. Time reminder alarm. Simple features menu section and setting. Sturdy belt clip. Powered by 1 x AAA battery for up to three months use, low battery warning with two second vibrate alert and visual indication. Receives status information from system transmitters. Compact size 72mm x 43mm x 15mm Weight (including battery) 56gs. Robust housing. Operating Frequency 433.92 Mhz.

Boxed system as shown below including 1 x EM-100 pager ORDER CODE FC-PKT PRICE £489.00 + VAT

ADDITIONAL PAGERS (EACH) ORDER CODE EM-100 PRICE £54.75 + VAT

BEDSIDE ALARM RECEIVER WITH XENON STROBE & VIBRATING PILLOW PAD

The KS-4POC can be used where a bedside alarm receiver is required for a deaf person staying at a hotel, halls of residence or living quarters where fire alarm warnings are required. The KS-4POC is powered by mains power adaptor with 28 hour battery backup. When the fire alarm transmitter is active, the KS-4POC receiver switches on the flashing light and vibrating pad to disturb the user from sleep.

Any number of KS-4POC bedside alarm units can be used with the transmitter system.

Conforms to the requirements of BS 5839.
CE & R&TTE certified.

ORDER CODE KS-4POC PRICE £122.00 VAT