Radio Paging & Security Products
Wireless disabled pull cord transmitter toilet alarms
INDIVIDUAL PART COMPONENTS - SPECIFICATIONS
Emergency Call Alarm: (ILB-02) H 210mm W 145mm D45mm Operates from 4 x D cell batteries 24 months battery life. Sounder output 90dB @ 10cm (adjustable volume control). Built in high intensity LED strobe light. Simple transmitter code learning procedure to register multiple pull cord alarms. Simple wall fixing brackets. Responds to all programmed transmitter units. Price £78.00 +VAT
Pull Cord Transmitter: (WCP-02) 85mm x 85mm x 10mm Powered by sealed in Lithium battery with a service life of five years. Reassurance LED lights to confirm operation to user. Fitted with 3M red pull cord with pull triangles. RF power 4mW max, narrow band digital transmission for maximum range and reliability. Range 25M. 100% waterproof making it suitable for bath-side or shower room fixing. Price £42.00 + VAT
Wireless Reset Button: (WRE-02) 85mm x 85mm x 10mm. Powered by sealed in Lithium battery with a service life of five years. Reassurance LED lights to confirm operation to user. RF power 4mW max, range 25M. Price £42.00 + VAT
RON-WC1 WIRELESS PULL CORD DISABLED BATHROOM
& TOILET ALARM SYSTEM.
The RON-WC1 is designed to provide a visual and audible warning when a disabled person
requires assistance when using a toilet or bathroom. The pull cord transmitter sends
a radio signal to the emergency call alarm. The call alarm produces an adjustable
volume tone alarm with bright flashing strobe LED’s to draw attention. The alarm
is reset using a wireless reset button (green).
All system parts are battery operated with very long battery life, so no electrical
wiring or professional installation is required. The system conforms to all safety
and operational standards relating to alarms for the disabled.
The RON-WC1 can be installed and ready for use in under 10 minutes and is guaranteed
to perform.
RON-WC1 AS SHOWN ABOVE INCLUDING ALL BATTERIES AND REQUIRED FIXINGS.
£155.10 inc VAT Delivery £9.25
CENTRAL MONITOR DISPLAY UNIT FOR MULTIPLE PULL CORD SYSTEMS
The Central Monitor CMU-02 can be used in buildings where multiple toilet alarms
require a central alarm point. A receptionist or security office for example can
receive alarm notifications with location of the toilet or washroom. Signal boosters
can also be incorporated to extend the range of the pull cord and reset transmitters
to reach the Central Monitor. The CMU-02 on alarm produces an audible alarm tone
with backlit display of pull cord transmitter identification. The CMU-02 is powered
by 12V DC power adaptor with battery backup provided by 4 x D cell batteries.
Dimensions: H 205 mm x W 145mm x D 42mm. Reports status of all devices commissioned
to the system including, low battery, system faults, missing or broken items Any
number of central monitors can be used with or added to a system.
ORDER CODE CMU-02 PRICE £211.50 inc VAT
Typical installation may involve pull cord for toilet, reset button, visual and audible
alarm outside W/C with an additional alarm at a reception area or security office.
Click HERE to see further options and equipment.
WIRELESS DISABLED TOILET ALARM
