Medpage Ltd
Home
Epilepsy
Care Aids - Telecare
Deafness
Radio Paging & Security Products
Contact Us
About Us
Wireless Nurse Call
Info
Visit Our Easylink Site
4-
The HRX005E is a two channel receiver compatible with the transmitters featured on this page. Two relays provide N/O N/C clean contact outputs. The relays can operate on timed, latch, or pulse mode. Power requirement 12 V DC.
Dimensions: W 112mm H 75mm D 24mm. Wall fixing flanges.
ORDER CODE HRX005E
PRICE £34.25 + VAT
Dimensions: W 112mm H 75mm D 24mm. Wall fixing flanges.
ORDER CODE HRX005E
PRICE £34.25 + VAT
Transmitter signal booster - In situations where building construction may reduce transmission range, or where extra transmission range is required, this simple to install signal booster can be used. The booster is powered by a mains AC/DC adapter with battery backup. The booster is equipped with a code learning button that can learn the address coding of up to 25 separate transmitters. In use, the booster is actually a transceiver that receives signals then retransmits them effectively doubling the transmission range. Further boosters can be added, triggered by the master booster (up to six can be added) each booster adds approximately 100m to the transmission range.
ORDER CODE HRP1000 PRICE £56.00 + VAT
ORDER CODE HRP1000 PRICE £56.00 + VAT
Dementia alarm products - Simple to setup and use anti-wander & Security Alarm Solutions
Door Contact Magnetic Switch
Useful security device to monitor doors and windows being opened. When the two halves of the switch are separated a signal is transmitted to the pager. Simple to install. Operates from 9 volt battery. Tamper alert, low battery warning, operating LED and power saving circuitry. Central push switch call-test button.
ORDER CODE KDC-005 PRICE £38.50 + VAT
Useful security device to monitor doors and windows being opened. When the two halves of the switch are separated a signal is transmitted to the pager. Simple to install. Operates from 9 volt battery. Tamper alert, low battery warning, operating LED and power saving circuitry. Central push switch call-
ORDER CODE KDC-
Key Fob Pendent Transmitter
A compact, lightweight transmitter measuring only L 45mm W 35mm D 12mm operated from a 12v penlight battery. Range 100m. Simple radio address code dip switch. Low battery warning transmitted to radio pager. Clip to clothing or belt.
ORDER CODE PEN-005 PRICE £18.80 + VAT.
A compact, lightweight transmitter measuring only L 45mm W 35mm D 12mm operated from a 12v penlight battery. Range 100m. Simple radio address code dip switch. Low battery warning transmitted to radio pager. Clip to clothing or belt.
ORDER CODE PEN-
Four channel vibration only
Pager offers numerous solutions for person to person paging, security and patient care requirements. Robust, lightweight and simple to use. The pager measures H 95mm W 55mm D 18mm and weighs only 83g including the battery. When triggered by a compatible transmitter, the pager vibrates for 30 seconds. A transmitter identification LED flashes. A reset switch provides an alarm cancel. One press of the reset switch cancels the vibration a second press of the reset switch cancels the flashing channel LED. Supplied with charger. The pager operates from a rechargeable 9 VOLT PP3 type battery with a single charge providing 72 hours use. General Specification: Frequency 433.92 Mhz. Coding by dip switch. Operating range 100M.
ORDER CODE ELVP-4 PRICE £84.60 inc VAT
Pager offers numerous solutions for person to person paging, security and patient care requirements. Robust, lightweight and simple to use. The pager measures H 95mm W 55mm D 18mm and weighs only 83g including the battery. When triggered by a compatible transmitter, the pager vibrates for 30 seconds. A transmitter identification LED flashes. A reset switch provides an alarm cancel. One press of the reset switch cancels the vibration a second press of the reset switch cancels the flashing channel LED. Supplied with charger. The pager operates from a rechargeable 9 VOLT PP3 type battery with a single charge providing 72 hours use. General Specification: Frequency 433.92 Mhz. Coding by dip switch. Operating range 100M.
ORDER CODE ELVP-
PIR Movement Detector Transmitter
Useful to detect people entering or leaving a building or restricted area. Operates from a 9 volt battery. Low battery warning transmitted to pager. Power saving circuitry. Simple to install. Alarm lock out function gives 45 seconds delay time between alarm transmissions.
ORDER CODE KPIR-005 PRICE £65.80 inc VAT
Useful to detect people entering or leaving a building or restricted area. Operates from a 9 volt battery. Low battery warning transmitted to pager. Power saving circuitry. Simple to install. Alarm lock out function gives 45 seconds delay time between alarm transmissions.
ORDER CODE KPIR-
PLUG IN VIBRATOR PAD
Vibrating pad for use with ELVP-4 pager. Provides a very powerful vibration when plugged into the pager output socket to provide a silent alarm to disturb sleeping person
ORDER CODE VIBPAD PRICE £9.94 inc VAT
Vibrating pad for use with ELVP-
ORDER CODE VIBPAD PRICE £9.94 inc VAT
